561R and 562R Series
Vishay Cera-Mite
Lower Voltage Ceramic Disc Capacitors 1000 VDC Temperature and Voltage Stabilized
Fig. 1 0.125\" max. (3)D max.LOFEATURES
•••••
Low lossesHigh stability
High capacitance in small size
Complete Range of Capacitance ValuesRadial leads
1.250\" min. (32)LS APPLICATIONS
T max.Fig. 2 0.125\" max. (3) LO•Bypassing
•Resonant circuit•Coupling
DESIGN
The capacitors consist of a ceramic disc of which both sidesare silver-plated. Connection leads are made of tinnedcopper or tinned copper clad steel having diameters of0.020\" (0.51 mm) or 0.025\" (0. mm).
The capacitors may be supplied with radial kinked or straightleads having lead spacing of 0.250\" (6.35 mm) or 0.375\"(9.5 mm).
The standard tolerances is ± 10 %
Coating is made of flame retardant epoxy resin inaccordance with “UL 94 V-0”.
D max. 1.250\" min. (32)LS T max.CAPACITANCE RANGE
LEAD OFFSET ‘LO” (NOMINAL)
1000 VDC
0.050\" (1.3 mm)
10 pF to 2700 pF
RATED VOLTAGE
INSULATION RESISTANCE
Min. 1000 ΩF or 50 000 MΩ
1000 VDC
DIELECTRIC STRENGTH BETWEEN LEADS
Component test:2500 VDC, 2 s
TOLERANCE ON CAPACITANCE
± 10 %
DISSIPATION FACTOR
2.0 % max. at 1 kHz; 1 V
CERAMIC DIELECTRIC
C0G, U2J (Class 1)X5F (Class 2)
CATEGORY TEMPERATURE RANGE
(- 55 to + 125) °C(- 25 to + 85) °C
C0G, U2JX5F
CLIMATIC CATEGORY ACC. TO EN60068-1
55/125/2125/085/21
C0G, U2JX5F
OPERATING TEMPERATURE RANGE
(- 55 to + 105) °C
Document Number: 23109Revision: 22-Jun-09
for technical questions, contact: ceramitesupport@vishay.comwww.vishay.com
1
http://oneic.com/
561R and 562R
Vishay Cera-Mite
Lower Voltage Ceramic Disc Capacitors 1000 VDC Temperature and Voltage Stabilized
ORDERING INFORMATION, CERAMIC 1000 VDC TEMPERATURE AND VOLTAGE STABILIZED
C(pF)C0G (NP0)
10
U2J (N750)
27303339X5F
56
68758210012015018020022025027030033039047050056068075082010001500200022002700
0.440 (11.2)0.490 (12.4)0.490 (12.4)0.560 (14.2)
0.156 (4.0)0.156 (4.0)0.156 (4.0)0.156 (4.0)
0.250 (6.4)0.375 (9.5)0.375 (9.5)0.375 (9.5)
22
0.025 (0.)
1
0.290 (7.4)
0.156 (4.0)
0.250 (6.4)
± 10 %
24
0.020 (0.51)
2
0.250 (6.4)
0.156 (4.0)
0.250 (6.4)
TOL.(%)
D
DIAMETERINCH (mm)
T
THICKNESSINCH (mm)
LSLEAD SPACEINCH (mm)0.250 (6.4)
WIRE SIZE
FIG.
AWG24
INCH (mm)0.020 (0.51)
2
ORDERINGCODE
± 10 %0.250 (6.4)0.156 (4.0)561R10TSQ10561R10TSQ27561R10TSQ30561R10TSQ33561R10TSQ39562R10TSQ56562R10TSQ68562R10TSQ75562R10TSQ82562R10TST10562R10TST12562R10TST15562R10TST18562R10TST20562R10TST22562R10TST25562R10TST27562R10TST30562R10TST33562R10TST39562R10TST47562R10TST50562R10TST56562R10TST68562R10TST75562R10TST82562R10TSD10562R10TSD15562R10TSD20562R10TSD22562R10TSD27
0.156 (4.0)
± 10 %
0.290 (7.4)
0.156 (4.0)
0.250 (6.4)
24
0.250 (6.4)
0.020 (0.51)
2
TAPE AND REEL OPTIONS
• Tape and Reel available on diameter sizes 0.250\" to 0.680\"
• To specify Tape and Reel, add two letter suffix to the ordering code (Details of the packaging code see general section of thecatalog)
www.vishay.com2
for technical questions, contact: ceramitesupport@vishay.comDocument Number: 23109
Revision: 22-Jun-09
http://oneic.com/
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVERELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any otherdisclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose orthe continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and allliability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particularpurpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typicalrequirements that are often placed on Vishay products in generic applications. Such statements are not binding statementsabout the suitability of products for a particular application. It is the customer’s responsibility to validate that a particularproduct with the properties described in the product specification is suitable for use in a particular application. Parametersprovided in datasheets and/or specifications may vary in different applications and performance may vary over time. Alloperating parameters, including typical parameters, must be validated for each customer application by the customer’stechnical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainingapplications or for any other application in which the failure of the Vishay product could result in personal injury or death.Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agreeto fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses anddamages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishayor its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel toobtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or byany conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill thedefinitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Councilof June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm thatall the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
http://oneic.com/
分销商库存信息:
VISHAY-BC-COMPONENTS562R10TSD15RE562R10TST56562R10TST47562R10TST39562R10TST30562R10TST27562R10TST22562R10TST20562R10TST15562R10TST12562R10TSQ82562R10TSQ75562R10TSQ56562R10TST47TR562R10TSD10TR561R10TSQ30561R10TSQ30RR561R10TSQ30RE562R10TSD15JA562R10TSD10562R10TSD20562R10TSD18562R10TSD27562R10TSD47
562R10TST50
562R10TST33562R10TST25562R10TST18562R10TST10562R10TSQ68562R10TST22TR561R10TSQ10562R10TSD15562R10TSD22562R10TSD33562R10TSS10
